Parts List
These are the purchased items that become part of the aircraft.
| type | name | source | qty | US$ (ea) | gms (ea) |
|---|---|---|---|---|---|
| airframe | X-uav Mini Talon (non-PNP) | Banggood | 1 | 104 | 562 |
| servos | Corona DS-929MG Digital Servo 2.2kg / 0.11sec / 12.5g | HobbyKing | 4 | 7 | 13 |
| airspeed sensor | Holybro digital air speed sensor | amazon | 1 | 67 | - |
| flight controller (bundle) | Pixhawk 4 and GPS and PM02 Bundle. SKU20068 | Holybro | 1 | 196 | - |
| computer (on-board companion) | Raspberry Pi 4 Model B 2GB RAM | Adafruit | 1 | 35 | 45 |
| computer micro SD card | Samsung PRO Endurance 128GB 100MB/s (U1) MicroSDXC Memory Card (MB-MJ128GA/AM) | Amazon | 1 | 20 | 1 |
| USB connectors | |||||
| camera | Raspberry Pi High Quality HQ Camera - 12MP | Adafruit | 1 | 50 | - |
| camera lens | 6mm 3MP Wide Angle Lens for Raspberry Pi HQ Camera - 3MP | Adafruit | 1 | 25 | 53 |
| camera mount wood | Used to build camera mount. .11" or 3mm thick. See link for alternatives. | Michaels | 1 | 2 | - |
| camera mount dampers | Used to isolate vibrations | Amazon | 1 | 8 | 12 |
| receiver | FrSKy R-XSR | getFPV | 1 | 21 | 2 |
| radio modem | RFD900x-US Telemetry Bundle (FCC approved) 2 modems + antennas + cables | IR-LOCK | 1 | 219 | - |
| radio antenna | RFDFLEX1 Antenna for use with RFD900x | RFDesign | 2 | 14 | 7 |
| battery** | Battery Turnigy LiPo 4S 10Ah 12C XT-90 JST-XH (14.8V, 148 Wh) | HobbyKing | 1 | 90 | 902 |
| battery velcro straps | For battery attachment to fuselage | Amazon | - | 13 | - |
| XT connectors | for power loom. XT30, XT60, and XT90 male to XT60 female. | hobbyking (details here) | - | 13 | - |
| wire | for power loom. 12, 14, 18 and 20AWG, red & black. | hobbyking (details here) | - | 12 | - |
| Battery Eliminator Circuit | Turnigy 5A (8-26v) SBEC for Lipo | HobbyKing | 2 | 6 | 18 |
| quad arm material | Carbon fiber pultruded strip (1000mm x 20mm x 4mm) | Carbon Kevlar Supply | 1 | 14 | 221 |
| quad ESC | Electronic Speed Controller 30A | rotorgeeks | 4 | 13 | 8 |
| quad motor | Cobra CP 2207/2300. CP2207 2300KV 2450KV Brushless Motor | Banggood | 4 | 19 | 31 |
| quad prop | HQ 6x3.5, pack of 4 (2 reverse and 2 standard) | Rotorgeeks | 1 | 4 | - |
| plane ESC | ZTW 40A Brushless ESC with BEC 3A/5V Speed Controller with brake, with connector | Amazon | 1 | 21 | 36 |
| plane motor | Cobra C-2814/16 KV=1050 | Cobra | 1 | 32 | 109 |
| plane prop | Aero-naut 10x8 (inches) CAM Carbon Folding Blades | Aloft Hobbies | 1 | 12 | - |
| plane prop holder | Aero-naut 724222 (7242/22) | Atlanta Hobby | 1 | 10 | - |
| plane prop bushing | Aluminum, 8mm long, 8mm OD, 6mmID | getFPV | 1 | 1 | 4 |
| plane prop stop | thin aluminum or old credit card piece | - | - | - | - |
| servo lead extensions | For servos and for quad ESCs, bag of 5 | HobbyKing | 2 | 3 | - |
| brackets | Two for flight controller, one for pitot tube | servocity (details here) | - | 6 | 33 |
| bolts, nuts, spacers | - | - | - | - | - |
| tape | for attaching items to airframe | Office Depot | 1 | 12 | - |
| glue | Gorilla Clear Grip Contact Adhesive, Clear | Amazon | 1 | 8 | - |
| velcro tape | for attaching items inside fuselage | Amazon | 1 | 6 | - |
| heat shrink | for wired connections and for quadarms | - | - | - | - |
| solder | - | - | - | - | - |
| thread locker | - | - | - | - | - |
See also: Tools, supplies, and other ground items.
See also: 3D print list (3D printing is optional).
**see important transport and safety information on the safety page
Weights, dimensions and specs have not been double-checked.
Prices do not include shipping & tax.