3D prints

There were twenty-seven 3D printed parts on the original mozzie, but 3D printing was avoided for the initial build of this aircraft. Instead the build uses parts that are included with the airframe as well as simpler shapes that can easily be cut and drilled. In particular you can fabricate or purchase the camera plates, the brackets, and the motor hole template. However, the project contains the following STL files in the 3D folder for those who prefer 3D printing:

• camera_plate_bottom.stl
• camera_plate_mid.stl
• camera_plate_top.stl
• bracket_large.stl
• bracket_small.stl (<- print two)
• motor_hole_template.stl

Many other good 3D part designs are at ItsQv.com (examples: blade stop and battery strap guide), and on the original mozzie.